Safety switch-off 34, Safety features, Safety switch-off – Miele KM 5993 User Manual

Page 34

Advertising
background image

Safety switch-off

Your cooktop is equipped with a safety
switch-off.

For excessively long operating time

If one of the cooking zones stays on for
an unusually long period of time (see
Table), and the power settings are not
altered, the zone will switch itself off
automatically and the corresponding
residual heat indication will appear.

To use the cooking zone again, switch
it back on in the usual way.

Power setting*

Maximum

operating time in

hours

h

2

1 / 1.

10

2 / 2.

5

3 / 3.

5

4 / 4.

4

5 / 5.

4

6

4

6.

3

7 / 7.

3

8 / 8.

3

9 / 9.

2

10 / 10.

2

11 / 11.

2

12

1

* The power levels marked with a dot

are available only with the extended
power levels (see "Programming").

If the sensors are covered

Your cooktop will switch off
automatically if one or more of the
sensors remains covered for longer
than approximately 10 seconds, for
example by finger contact, food boiling
over, or by any object laid on top of
them.
At the same time an acoustic signal
sounds every 30 seconds (for a
maximum of 10 minutes), while in the
display of the covered sensor switch an
F will flash:

^ Clean the control area or remove the

obstruction.

This will shut off the acoustic signal and
the

F goes out.

^ Switch the cooktop back on again

using the ON/OFF sensor

s. You can

then resume operation as usual.

Safety features

34

Advertising
This manual is related to the following products: