Maytag WINSLOW PI40 User Manual

Page 16

Advertising
background image

16

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

5. Screw in the four tap tights, included with this kit, using a 5/32 allen

wrench.

6. Replace the burn pot and check that it is firmly in place (if you can

rotate the burn pot it is not installed correctly). If present, install

the optional log set according to the log set installation instructions

(included with your log set).

7. Re-hang the door by reversing the instructions in step 1.

Figure 29

TESTING / LISTING

Advertising