Maytag INTELLIDRY MD-16 - Manual (Page 6)

5
C
ONTROLS AT A GLANCE
Step 1 Select cycle
TIME DRY/AIR FLUFF
may be
selected for any load if the IntelliDry sensor
system is not desired. Set the control to the
desired number of minutes.
WRINKLE RELEASE
will release
wrinkles from items that are clean and dry
but slightly wrinkled, such as from a crowd-
ed closet, packed suitcase or from sitting in
the dryer too long after the end of the cycle.
It provides 10 minutes of heated tumbling
and 5 minutes of cool down tumbling with-
out heat.
NOTE: The dial can be turned in either direction to select a cycle. Once started, the dial will not advance at a spe-
cific rate during the IntelliDry cycles. At first the dial may not advance at all. Toward the end of the cycle (when the
load begins to dry) the dial will advance at a more regular rate and much more quickly. This is normal operation.
INTELLIDRY WRINKLE FREE FABRICS
WITH PRESS CARE
automatically senses the mois-
ture in the load and shuts off when the selected dryness
level is reached. It minimizes wrinkles of synthetic fabrics
such as acrylic, nylon, polyester or blends by providing an
unheated cool-down period at the end of the cycle. Simply
set the control to the desired dryness level (MORE DRY –
LESS DRY). The line between MORE DRY and LESS DRY
is the initial preferred setting for the majority of loads.
INTELLIDRY REGULAR automatically senses the
moisture in the load and shuts off when the selected dryness
level is reached. This cycle is designed for loads such as tow-
els, underwear, t-shirts, jeans, etc. Set the control to the
desired dryness level (MORE DRY – LESS DRY). The line
between MORE DRY and LESS DRY is the initial preferred
setting for the majority of loads.
DRYEL FABRIC CARE
(select mod-
els) is designed for use on dry clean only
fabrics in combination with Dryel Dry Clean
Only Fabric Care product. Placing the con-
trol dial arrow at the DRYEL line will provide
the optimal amount of time needed to prop-
erly use Dryel. (For more information on
using the Dryel cycle, see page 7.)
DAMP DRY
is designed to “partially”
dry items. It provides approximately 20
minutes of heated tumbling and 5 minutes
of cool down tumbling without heat.
Control features and styling vary by model.