Miele KFN 8995 SD ED-1 - Manual (Page 22)

Your appliance has been fitted with a
warning system, to ensure that the
temperature in the freezer section does
not rise unnoticed and to avoid energy
being wasted if a door is left open.
Temperature alarm
If the temperature in the freezer section
gets too warm, an alarm will sound and
the temperature display behind the
door will flash. The temperature display
on the outside of the appliance door will
also flash alternately with
§%. The set
temperature determines which
temperatures will trigger the alarm.
The alarm will sound and the
temperature display will flash:
– if the freezer section door has been
left open for some time, e.g., in order
to load, re-arrange or remove food.
– when freezing large amounts of food
at once.
– if there has been a lengthy
interruption to the power supply.
Door alarm
If one of the doors is left open for more
than approx. 60 seconds, the alarm will
sound and the temperature display on
the outside of the appliance door will
flash alternately with
; (the symbol for
an open door).
Activating the alarm system
The alarm system is always active. It
does not need to be switched on
manually.
Switching the alarm off early
Once the set temperature has been
reached in the freezer section, the
alarm stops and the temperature
display behind the door will stops
flashing and stays lit. The display on
the outside of the appliance door will
now show the temperature only.
However, if the noise disturbs you, you
can switch the alarm off before this if
you wish.
^ Press the alarm off button.
The alarm will stop. The temperature
display will continue to flash until the
set temperature has been reached.
The display then stops flashing and
stays lit. The alarm system is now
ready should it be needed again.
Alarm
22