Changing the door hinging – Miele KFN 8995 SD ED-1 User Manual
Page 50
Advertising
^ Using a wrench, unscrew the hinge
pins from hinge bracket b, and refit
all hinge parts c in the hinge bracket
on the opposite side.
Removing the refrigerator section
door:
^ Remove the bearing block cover on
top of the appliance. To do this:
Using a screwdriver, carefully pry the
bearing block cover off from behind.
^ Open the door to the refrigerator
section.
^ Remove the cover (see illustration).
^ Open the plug holder out towards
you, and use it to pull the plug out.
^ Pull the cable carefully upwards from
behind the bearing block.
^ Close the refrigerator section door.
Changing the door hinging
50
Advertising
This manual is related to the following products: