Miele KFN 8995 SD ED-1 - Manual (Page 16)

The display on the outside of the
appliance door
- shows the current temperatures of the
refrigerator and freezer sections,
- shows if the SuperCool or
SuperFreeze functions are switched on,
and
- tells you if there is a problem with the
appliance.
The top half of the display shows the
temperature of the refrigerator
section, while the lower half shows the
temperature of the freezer section.
When you first switch the appliance on,
and both doors are shut, a Welcome
screen will appear after a short time.
This will then change to show the
temperature displays.
At first, bars will flash alternately with
the warning triangle and the
thermometer symbol in the lower half of
the display, to show that the
temperature range which can be
displayed and also the set temperature
have not yet been reached.
Adjusting the contrast
If you want to change the contrast of
the display:
^ Open the refrigerator door.
^ Press and hold the SuperFreeze
button for approx. 5 seconds.
The SuperFreeze indicator light will
flash and a
;
will flash in the
temperature display.
^ Press the "+" temperature setting
button twice until a
C
flashes in the
display.
^ Press the SuperFreeze button again.
^ Close the refrigerator door within 10
seconds.
The contrast adjustment mode will
now begin. Vertical bars will appear
in the display. The number of bars
will increase or decrease as the
contrast setting is adjusted.
There are 5 different contrast settings.
Each setting will appear in the display
for approx. 4 seconds.
^ Open the refrigerator door once you
find your preferred setting.
This will save that particular contrast
setting. The setting remains stored in
memory even after a power cut.
Door display
16