Miele KFN 8995 SD ED-1 - Manual (Page 21)

Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
behind the door set as low as possible.
However, if the door is opened, or a
setting is changed or the alarm is
sounding, the temperature display
behind the door will appear much
brighter for approx. 1 minute.
The brightness level of this display can
be adjusted:
^ Press and hold the SuperFreeze
button for approx. 5 seconds.
The SuperFreeze indicator light will
flash and a
;
will flash in the
temperature display.
^ Press one of the temperature selector
buttons repeatedly until
^
appears in
the display.
^ Press the SuperFreeze button again.
^
lights up in the display.
^ You can now adjust the brightness
level by pressing the temperature
selector buttons. You can choose
from settings
1 to 5:
1: lowest setting,
5: brightest setting.
^ Press the SuperFreeze button to save
the setting.
^ To exit the setting mode, press the
freezer section On/Off button.
If you do not do this, the electronics
will revert to normal operation after 2
minutes.
Selecting the correct temperature
21