Miele KFN 8995 SD ED-1 - Manual (Page 49)

The appliance is supplied with a
right-hand hinge. If left-hand door
hinging is required, follow the
instructions below.
Check that the appliance has been
disconnected from the electricity
supply and unplugged. Danger of
electric shock.
To change the door hinging, you will
need various sizes of Torx
screwdrivers, a pair of flat-nosed
pliers and a wrench.
Removing the door handles:
First, the side sections of the handles
must be removed:
^ Pull door handle a towards you. Side
section b slides back, creating a
gap d between side section b and
mounting plate c.
^ Place a suitable object (e.g., a spoon
handle) in gap d, and slowly pry the
handle towards the door.
Be careful not to let the "spoon
handle" slip, causing damage to the
appliance.
The side section b can now be
removed.
^ Pull side section b out of the guides
on the mounting plate.
^ Loosen the 4 screws in the mounting
plate, and remove the handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
Removing the freezer section door:
^ Carefully pry off cover a using a
screwdriver.
^ With the appliance door closed,
unscrew lower hinge bracket b and
then take the door down and off.
^ Refit cover cap d on the opposite
side.
Changing the door hinging
49