MITSUBISHI ELECTRIC WD-52825 - Manual (Page 35)

34 35
Remote Control Functions: Overview
Overview
Figure 1, following page
1. Slide Switch: Selects A/V product to be controlled
by the remote control. Select TV for NetCommand®
device control.
2. Numbers: Individually selects channels or enters
information into menus.
3. POWER: Turns power on and off for TV and other A/V
products.
4. SQV (SuperQuickView™): Scans through
memorized lists of favorite channels.
5. QV (QuickView™): Switches between the current
channel and last channel viewed.
6. SUB/CANCEL: Clears SQV and some menu entries
and cancel recordings. For digital channels, adds
separator between major and sub channel numbers.
7. DEVICE: Displays the Device Selection menu to
select the device to view (Ant-1 and Ant-2, TV Disc or
devices connected to the TV’s inputs including IEEE
1394 devices).
8. CHANNEL: Scan up or down through memorized
channels. Performs chapter skip function for
NetCommand® controlled DVD’s.
9. VOLUME: Changes sound level.
10. MUTE: Turns sound on or off.
11. TV MENU: Displays on-screen menu system.
12. ADJUST: Press , , and to navigate menus,
change settings, and move the PIP on-screen
location. Operates many NetCommand functions.
Performs skip forward and backwards function of TV
Pause.
13. ENTER: Selects a channel number or menu item.
14. GUIDE: Displays ChannelView™ for Ant-1 and 2.
Displays Track List for TV Disc and IEEE 1394 A/V
Discs. Displays program guide for satellite receiver,
some cable boxes or DVD Disc menu. Displays
thumbnails or playlists for media card files.
15. Light: Located on the right side of the remote control,
this feature illuminates buttons or labels.
16. DEVICE MENU: Displays menus for devices
connected to TV, including CableCARD™.
17. HOME: Exits TV on-screen menus and returns to TV
viewing.
18. V-CHIP: Turns On or Off the V-Chip Lock.
19. INFO: Displays on-screen summary of the current
device used and any broadcast information available
(including current V-Chip information). See Appendix
D for details.
20. AUDIO: Selects and adjusts individual audio settings.
21. VIDEO: Selects and adjusts individual video settings.
22. PIP CH: Scrolls up or down through memorized
channels for PIP.
23. PIP/POP: Cycles through PIP and POP display
choices.
24. EXCH: Exchanges PIP or POP and main TV picture.
25. SLEEP: Sets the TV to turn off within 2 hours. See
next page for setup instructions.
26. PIP DEVICE: Displays PIP Selection menu to select
the PIP or POP image source device
27. FORMAT: Changes the shape and size of the main TV
picture.
28. CONNECT: Initiates IEEE 1394 peer-to-peer
connections.
29. REC (Record): Display the Record List for TV Disc.
Records with a VCR, sets up recordings for DVCR,
IEEE 1394 devices or while in ChannelView.
30. PAUSE: Pause a live TV picture when no PIP or POP
image is displayed (when TV Pause is set to Always or
On Request is enabled). When PIP or POP image is
visible, pauses that image (default TV Pause set to Off
or On Request not enabled). Pauses a VCR, DVD or
A/V Disc, media card file. Returns to TV viewing from
TV Pause.
31. REW/REV: Rewinds or reverses search in TV Pause,
while watching the TV Disc or with a VCR. Reverses
scan with a DVD, A/V Disc or media card file.
32. PLAY: Plays the TV Disc or VCR, DVD, A/V Disc or
media card file.
33. STOP: Stops a VCR, DVD, TV Disc, A/V Disc or media
card file.
34. FF/FWD: Fast forward or forward search in TV Pause,
while watching the TV Disc, with a VCR or media card
file, or fast play a DVD.