Motorola SBG940 - Manual (Page 100)

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide 92
8 Click Next. The following window is displayed:
9 Select The updated driver... and click Next. If the following window is not displayed, verify that the SBG940
Installation CD-ROM is properly inserted in the CD-ROM drive. If you still cannot find the correct driver file,
click Cancel to cancel the installation and perform the procedure for “
Removing the USB Driver from
Windows 98 Second Edition or Windows Me ”. Then repeat this procedure.
10 After the window shown under step 9 is displayed, click Next.
If a window with the message Copying Files... displays and asks for the CD-ROM drive, type the CD-ROM
drive letter (for example, “D:”) and click OK.
If an Insert Disk window similar to the one below is displayed, Windows system files are needed to complete
the installation. To install the files, insert your Windows 98 Second Edition CD-ROM in the CD-ROM drive and
click OK.
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.