Setting up a usb driver in windows2000, Setting up a usb driver in windows 2000 – Motorola SBG940 User Manual
Page 102
Advertising
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
94
Setting Up a USB Driver in Windows 2000
1
Insert the SBG940 Installation CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be
inserted and read by the PC before you connect the SBG940 to the PC.
2
Connect the USB cable as shown in
.
A few seconds after you complete the USB connection, the Found New Hardware window is displayed:
3
Click Next. The following window is displayed:
Be sure “Search for a suitable driver for my device” is selected.
Although your SBG model number may be different than in the images in this guide, the procedure is
the same.
Advertising