Motorola SBG940 - Manual (Page 97)

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide 89
Setting Up a USB Driver
The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG940.
Before connecting a PC to the USB port, perform the appropriate procedure for your Windows version:
• Setting Up a USB Driver in Windows 98 Second Edition
• Setting Up a USB Driver in Windows 2000
• Setting Up a USB Driver in Windows Me
•
Setting Up a USB Driver in Windows XP
The SBG940 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect
through Ethernet only.
If you have a problem setting up the USB driver, remove it by performing one of:
• Removing the USB Driver from Windows 98 Second Edition or Windows Me
• Removing the USB Driver from Windows 2000
• Removing the USB Driver from Windows XP
Then perform “Running the Motorola USB Driver Removal Utility” on page 107.
Caution!
Be sure the SBG940 Installation CD-ROM is inserted in the CD-ROM drive before you plug in the
USB cable.