Motorola SBG940 User Manual
Page 78
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
70
5
Choose the WPA Authentication type:
6
For Remote (Radius) authentication only, set:
7
For Local (WPA-PSK) authentication only, set:
8
Click Save Changes.
If you need to restore the wireless defaults, click Reset Wireless Defaults.
Remote
(Radius)
If a Remote Authentication Dial-In User Service (RADIUS) server is available, you can select this
option and go to step 6. A RADIUS server is typically used in a large corporate location.
Local
(WPA-PSK)
If you choose Pre-Shared Key (PSK) local authentication, if the passphrase on any client
supporting WPA matches the PSK Passphrase set on the SBG940, the client can access the
SBG940 WLAN. To set the PSK Passphrase, go to step 7. A local key is typically used in a home
or small office.
Radius Port
The port used for remote authentication through a RADIUS server. It can be from 0 to 65535.
Radius Key
The key for remote authentication. It can be from 0 to 255 ASCII characters.
Radius Server
Type
Currently IPv4 only.
Radius Server The RADIUS server IP address in dotted-decimal format (xxx.xxx.xxx.xxx).
PSK
Passphrase
The PSK password containing from 8 to 63 ASCII characters. You must set the identical
passphrase on each WLAN client (see “