McIntosh MVP871 - Manual (Page 10)

10
Rear Panel Connections
POWER CONTROL IN
receives turn-on signals
from a McIntosh compo-
nent and POWER CON-
TROL OUT sends turn-on
signals on to another
McIntosh Component
Connect the MVP871
power cord to a live AC
outlet. Refer to informa-
tion on the back panel of
your MVP871 to deter-
mine the correct voltage
for your unit
IR INput for
connecting an
IR Receiver
DATA IN
receives op-
erating data
from a McIn-
tosh Control
Center
COAXIAL DIGI-
TAL AUDIO OUT-
PUT sends signals
to a Control Center
with a D/A Con-
verter or a decoder
OPTICAL DIGITAL
AUDIO OUTPUT
sends signals to a Con-
trol Center with a D/A
Converter or a decoder
RS-232C
connector for
connection
to a remote
control device
Y OUTPUT connects to the Y Component Input of
the TV/Monitor or other video component.
P
B
/C
B
OUTPUT connects to the P
B
/C
B
Component
Input of the TV/Monitor or other video component.
P
R
/C
R
OUTPUT connects to the P
R
/C
R
Component
Input of the TV/Monitor or other video component
S-VIDEO OUTPUT
supplies video signals
to a S Input of an A/V
Control Center or oth-
er video component
VIDEO OUTput sup-
plies video signals
to connect to a Com-
posite Input of an
A/V Control Center
or other video com-
ponent
UNBALANCED
AUDIO OUTPUTS
supply Six Channels
of analog audio and
connects to the Exter-
nal Input of an A/V
Control Center
HDMI OUT supplies
digital video and digi-
tal audio signals to an
Input of an A/V Con-
trol Center or other au-
dio/video component
UNBALANCED
AUDIO OUT-
PUT supplies Two
Channels of Ana-
log Audio and con-
nects to the Analog
Input of an A/V
Control Center
BALANCED
AUDIO OUTPUTS
supply two channels
of analog audio to
connect to Balanced
Inputs of other com-
ponents