McIntosh MVP871 User Manual
Page 51
51
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. This will ensure the
proper equipment location on the bottom pad. Failure to do
this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please
call or write Customer Service Department of McIntosh
Laboratory. Refer to page 4. Please see the Part List for the
correct part numbers.
Quantity Part Number Description
1
033838
Shipping carton only
4
033837
End cap
1
033836
Inside carton only
1
033725
Top pad
1
034301
Bottom pad
4
017937
Plastic foot
4
400159
#10-32 x 3/4” screw
4
404080
#10-7/16” Flat washer