McIntosh MVP871 - Manual (Page 39)

39
5. Next continue
to the SLIDE
SHOW Set-
tings. If no
other changes
are to be made
in Setup Mode
at this time, exit
by pressing the
RTRN (Return)
Push-button.
Note: The
SETUP Push-button may be also pressed to exit
the setup mode.
Slide Show
The MVP871 has a feature to view photos from a disc and
the interval time between photos is adjustable from 5 to 15
seconds. To change the interval time perform the following
steps:
1. Press the SETUP Push-button on the supplied Remote
Control to access the On-Screen Language Setup
Menu. Then press the Right directional Push-button
to select the OTHER Setup Menu Icon Tab.
Note: If there is a Disc playing in the MVP871 press
the STOP Push-button twice before pressing the
SETUP Push-button.
2. Use the Down directional Push-button on the Re-
mote Control to select the SLIDE SHOW Menu. Refer
to figure 70.
3. To change from
the default
setting of 5 sec-
onds press the
Right direc-
tional Push-but-
ton and then
the Up or
Down direc-
tional Push-but-
tons to select
the desired time followed by the SELECT Push-button.
Note: The title of the icon button-bar will change color
from yellow (the cursor color) to blue indicating
the selected item.
4. Return to the Other Setup Menu by pressing the Up
directional Push-button.
5. If no other changes are to be made in Setup Mode at
this time, exit by pressing the RTRN (Return) Push-
button.
Note: The SETUP Push-button may be also pressed to
exit the setup mode.
SETUP, con’t
Figure 69
Figure 70