McIntosh MVP871 User Manual

Page 26

Advertising
background image

26

(4:3 PS) Conventional Screen

Mode with Pan and

Scan Format refer to

figure 25.

(4:3 LB) Conventional Screen

Mode with Letter

Box Format refer to
figure 26.

(16:9) Wide Screen Mode

Format refer to figure

27.

Note: The title of

the icon but-

ton-bar will

change color

from yellow

(the cursor

color) to blue

indicating the

selected item.

4. Return to the Video Setup Menu by pressing the Up

directional Push-button.

5. Next continue to the TV TYPE Settings. If no other

changes are to be made in Setup Mode at this time,

exit by pressing the RTRN (Return) Push-button.

Note: The SETUP Push-button may also be pressed to

exit the setup mode.

TV Type

This selects the proper video signal format to match the

capabilities of the connected TV/Monitor. To change from

the default setting of MULTI perform the following steps:

Notes: The TV Type for use in U.S. and Canada is NTSC, for

use in parts of Europe is PAL and the MULTI Mode

will automatic select the proper video signal format. If

the TV/Monitor is displaying an image without color

and/or a loss of Horizontal/Vertical Synchronization,

refer to the TV/Monitor Owner’s Manual to determine

the correct setting to be used.

1. Press the SETUP Push-button on the supplied Remote

Control to access the Language Setup Menu. Then

TV Aspect

This selects the proper display ratio of height and width

to match the TV/Monitor connected to the MVP871. To

change from the default setting of Wide (16:9) perform the

following steps:

1. Press the SETUP Push-button on the Remote Control

to access the Language On-Screen Setup Menu. Then

press the Right directional Push-button to select the

Video Setup Menu Icon Tab. Refer to figure 23.

Note: If there

is a Disc playing in the MVP871 press the STOP

Push-button twice before pressing the SETUP

Push-button.

2. Use the Down directional Push-button followed by

the SELECT Push-button on the Remote Control to

select the TV ASPECT Menu. Refer to figures 24 and

25.

3. To change

from the Wide

(16:9) setting

use the Up

or Down

directional

Push-buttons

followed by the

SELECT Push-

button:

Video Setup

Figure 28

Figure 26

Figure 27

Figure 23

Figure 24

Figure 25

Advertising