Marantz PD4298HD s - Manual (Page 17)

7
ENGLISH
Connecting to Video Equipment
(such as a Laser Disc player, a DVD player, a DSS,or a Video Camera)
+ -
SPEAKER
TERMINAL
L/MONO
R
AUDIO IN
VIDEO2
COMPONENT IN
P R /C R P B /C B Y VIDEO S
VIDEO1
COMPOSITE IN
(8‰8W)
R
- +
L
Nearer Terminal
Further terminal
Use if the video
equipment has an
S video input terminal
T
o
S video
output ter
minals
T
o
S video input
ter
minals
T
o
audio/video
output ter
minals
T
o
audio output
ter
minals
T
o
component
output ter
minals
T
o
audio/
video input ter
minals
To component
input terminals
T
o
audio input
ter
minals
Video equipment
(such as a Laser Disc player,
a DVD player, a DSS,or a Video Camera)
Monitor rear panel
Power
cable
Power cable
connector
Red
(R)
White
(W)
Red
(R)
White
(W)
Red(R) Red(R) White(W) White(W) Y
ello
w(V)
Yellow
(V)
●
Read SAFTEY GUIDELINES ( to ) carefully to ensure maximum safety before
proceeding to these steps:
1) Choose an appropriate site and install the product on a level table where the stand is secure.
■
Install the monitor to have ready access to a power socket available.
2) Make sure that the video equipment’s power switch is off.
3) Interconnect the signal input terminal on the monitor rear panel and the video equipment’s
signal output terminal to each other using an optional cable.
4) Insert one end of the power cable included into the rear-panel power cable connector and the
other end into a power socket.
5) Turn on the monitor, then the video equipment’s to make sure that a display image appears
on the monitor screen.
■
For instructions on turning on the monitor and adjusting its display images, see “Operating
Instructions” ( to ).
■
If video equipment with an S video output terminal is used, cabling by the S video cable
is recommended to provide finer video quality. (If an S video input terminal and a video
input terminal connect to the monitor at the same time, S video input would govern.)
9 17