Marantz PD4298HD s - Manual (Page 21)

11
ENGLISH
Sound Mute
●
Press the remote controller MUTE button once again and the mute will be canceled and the
guidance will change to VOLUME (blue), enabling the volume to be heard.
■
When MUTE is used, the guide display will continue for 5 sec. and then turn off.
Remote
controller
MUTE
MUTE : 30
Sound volume setting
●
Press the remote controller MUTE button to mute the sound temporarily.
■
When you press the button, [MUTE] (pink) and the status
of volume setting will be displayed in a guidance image.
● While the sound is muted, press the VOLUME button ▼ to turn down
the volume.
● While the sound is muted, press the VOLUME button ▲ to cancel the
mute.
■
You can also adjust the sound volume setting of the mute
via the on-screen display system.
Input Signal Status Display
Remote
controller
ENT ENT
TV
9
RECAL
RGB1 [D-SUB]
H : 46.5kHz, V : 60Hz
Input terminal name
●
Turn the remote controller jog dial to choose RECALL and press the ENT button to show the
input signal state on the screen.
●
Choose RECALL once again and press the ENT button to exit the screen.
■
The contrast adjustment mode will
exit when no keys are entered for 5
seconds.
Input horizontal
frequency
Input vertical
frequency
12
(The display will turn to pink.)