Marantz PD4298HD s - Manual (Page 22)

12
ENGLISH
OPERATING INSTRUCTIONS (continued)
■
It is recommended that, when inputting a computer signal to the main unit
to get a grasp of the overall image, the DISPLAY AREA of a 1024 x 768
VESA display at 75Hz be set to FULL with SCAN set to INT.
■
Flicker can occur when a personal computer signal is input.If the vertical
frequency is less than 75Hz, it is recommended that the vertical frequency
be increased (upper limit: 75Hz).
On-Screen Display System
■
Press the SELECT button of the main unit (
or
key of the remote controller) to select an
item by moving the pink text .
■
Press the VOLUME button and the
▲
and
▼
keys of the main unit (
〈
or
〉
key of the remote
controller) to adjust or set the selected item, or
to switch the menu.
● When a choice is followed by “:”, it indicates that the
choice can be adjusted or changed.
● When a choice is followed by , a menu can be
opened by pressing the remote-controller
CURSOR/CONTROL button
〉
or the main unit
SELECT button and VOLUME button ▲.
● When [RETURN] is selected, press the remote-
controller button CURSOR/CONTROL
〈
or the main
unit SELECT button and VOLUME button ▼ to exit to
the original menu
■
For information on adjusting and setting
choices, see to .
PICTURE
SOUND
DISPLAY
FUNCTION
MAIN MENU
Remote
controller
ENT ENT
CH VOL OK
TV
0
MENU
CONTRAST :117
BRIGHTNESS : 0
COLOR
TINT
SHARPNESS
OPTIONS
RETURN
PICTURE MENU
Pink
Pink when brightness
is selected
Guidance
●
Press the MENU button once again to exit the Main Menu.
■
The Main Menu will close automatically when no keys are entered for 10 seconds.
13 16
●
Either turn the remote controller jog dial to choose MENU and press the ENT button or press the
main unit MENU button to open the Main Menu. The adjustment menu lets you program multiple
adjustments or settings by using the CURSOR/CONTROL buttons (on the remote controller, the ,
,
〈
,
〉
buttons; (on the main unit, the SELECT and VOLUME ▲ and ▼ buttons).
HINTS
■
Burn-in (residual image) can occur if the same image is displayed for an
extended time. To reduce this possibility, change the display contents at
suitable intervals.
■
If special images created on a PC or any other equipment (such as those
composed of a checker-flag pattern) are displayed across the screen, the
hue may be varied depending on the contrast or brightness setting.
Main unit
MENU
SELECT
VOLUME
Menu selection mark
14 Useful
knowledge
〉
〉
〉
〉