Marantz PD4298HD s - Manual (Page 31)

21
ENGLISH
TROUBLESHOOTING
●
Press the remote controller jog dial to choose MENU and press the ENT button or press the main unit
MENU button to cancel sound mode.
■
Power save mode is enabled when sound mode is canceled.
■
If an input signal is available, the monitor displays the input
signal by canceling sound mode automatically.
Power Save Mode
RGB sync
signal
Horizontal Yes No Yes No
Vertical Yes Yes No No
Video signal
Active
(normal display)
Blank (no video)
Operation mode On
Indicating lamp Lights green Blinks green
Video signal Yes No
Operation mode On Off 1)
Screen display Normal display Blank (no video)
Indicating lamp Lights green Blinks green
1) Either turn the remote controller jog dial to choose MENU and press the ENT button or press the main unit MENU button.
Otherwise, press the CURSOR/CONTROL buttons to switch to the sound mode. 21
●
While the power saver feature is in the off mode, e ither turn the remote controller jog dial to
choose MENU and press the ENT button or press the main unit MENU button to exit the off mode and
enable sound output.
■
When the monitor enters sound mode, it displays a mode
indication on the screen.
■
In sound mode, sound volume can be adjusted.
Sound Mode
SOUND MODE
21
21
POWER SAVE
■
When the RGB input jack is selected
●
When this main unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set
to be activated automatically when the computer is not being used to reduce power consumption by
this main unit.
■
When the Video Input jack is selected
●
When there is no video signal input, the power-saving system operates to reduce the power consumed
by the main unit.
Power consumption 450W (standard) 5W or less
Off 1)
1) Either turn the remote controller jog dial to choose MENU and press the ENT button or press the main unit MENU button.
Otherwise, press the CURSOR/CONTROL buttons to switch to the sound mode. 21
Power consumption 450W (standard) 5W or less