Auto scan – Motorola HDT100 User Manual
Page 23
18
AUTO SCAN
Before you can start using the HDT100, you need to program it with the
station numbers of the over-the-air digital TV stations available in your
area. This can be done by simply running auto scan from the HDT100’s
on-screen menu.
You can navigate the on-screen menu from the HDT100’s front panel or
by using the remote control:
•
Use the ! and "arrow keys to move up and down the on-screen
menu
•
Use the
SELECT
button to select the highlighted item on the
on-screen menu
•
Use the
EXIT
button to return to the main menu from a submenu or
to leave the main menu
To run auto scan:
1
Press the
POWER
button on the HDT100 front panel or remote control
to turn on the receiver.
2
Press
MENU
on the remote control or
MENU
/
ENTER
on the front panel.
The Menu screen is displayed:
3
Using the "arrow key, highlight Installation and press
SELECT
. The
Password window is displayed.