Setting up the hdt100’s clock for your time zone – Motorola HDT100 User Manual
Page 34
Advertising
29
Setting Up the HDT100’s Clock for Your Time Zone
To change the time zone for the HDT100’s clock:
1
Press
MENU
on the remote control or
MENU
/
ENTER
on the front panel.
The Menu screen is displayed.
2
Highlight Installation and press
SELECT
. The Password window is
displayed.
3
Enter your four-digit password. If you have not yet created your own
password, enter the default password: 0000. The Installation menu is
displayed.
If you wish to change your password, see “Changing Your
Password” on page 28.
4
Highlight Clock Setup and press
SELECT
. The Local Time window is
displayed:
5
Use the # and $ keys to change the time zone. When you are
finished, Press
EXIT
twice to exit the on-screen menu.
Advertising