Motorola HDT100 - Manual (Page 31)

26
Setting Parental Controls
The HDT100 offers two options for parental controls:
• V-Chip
• Channel Lock
You can use the V-chip technology to block certain types of
programming from being viewed. The V-chip settings are based on the
MPAA and TV ratings systems. Once you set the rating limit in the
V-Chip Setup menu, no programming beyond that rating limit can be
viewed.
To set up your V-chip settings:
1
Press MENU on the remote control or MENU / ENTER on the front panel.
The Menu screen is displayed.
2
Highlight Installation and press SELECT . The Password window is
displayed.
3
Enter your four-digit password. If you have not yet created your own
password, enter the default password: 0000. The Installation menu is
displayed.
If you wish to change your password, see “Changing Your
Password” on page 28.
4
Highlight V-Chip Setup and press SELECT . The V-Chip Setup
window is displayed.
5
Use the !"# $ keys to highlight the desired rating limit(s) and then
press
SELECT .
6
When finished, press EXIT twice to exit the on-screen menu.