Wrapper removal, 3. wrapper removal – Miller Electric 375 X-TREME User Manual
Page 23
Advertising
.
A complete Parts List is available at www.MillerWelds.com
OM-225 216 Page 19
6-3.
Wrapper Removal
Ref. 804 505-A
Y
Turn off power, and
disconnect input power plug
from receptacle before
working on unit.
Y
Significant DC voltage can
remain on capacitors after unit
is Off. Wait until all front panel
LED’s are off before removing
wrapper.
Y
Check DC bus voltage
according to Section 6-4 after
removing wrapper.
1
Wrapper
2
Torx Screws (Fine Thread)
Remove Torx screws and slide
wrapper off.
Torx 25
Tools Needed:
1
2
Advertising
This manual is related to the following products: