Multi-Tech Systems RF102S - Manual (Page 13)

Software Installation
13
6. The Setup Wizard: Device IP Address dialog box
displays.
Enter the last octet of the local network IP address for this
device. The Setup Wizard automatically detects the first
three octets of your local IP address.
You can change the network name of your RouteFinder. If
you are connecting to an ISP, the device name can act as
your computer name if required on the remote system.
Click Next to continue. The device will search the network
to ensure that the IP address is valid. This may take
several seconds.
Note: If your ISP provided you with an IP address, do not
enter that address. Enter the IP address for this device on
your local network. Refer to the Glossary in the User
Guide for more information on IP addressing.