Multi-Tech Systems RF102S - Manual (Page 18)

RouteFinder Quick Start Guide
18
IP Routing (NAT Enabled) and IP Routing (NAT
Disabled)
If you select IP Routing for an asynchronous port, the
Setup Wizard: IP Routing dialog box displays.
Enter the information required to dial-up and login to your
ISP’s remote server:
• Telephone Number: Enter the phone number used to
dial your remote server (ISP).
Note: If you must dial a number to get an outside line (such
as “9”, or “0”), enter the required number plus a “w”(wait) or
a comma in the Telephone box. For example, 9w555-2323
or 9,,5552323. Each comma provides a 3-4 second delay.
• User Name: Enter the User Name for your remote server
or ISP account.
• Password: Enter the Password for your remote server or
ISP account.
• Password Verification: Re-enter the password for your
remote account.
Click Next.