Multi-Tech Systems RF102S - Manual (Page 20)

RouteFinder Quick Start Guide
20
The final step in configuring your RF102S for basic
operations is to enter the model and DTE baudrate of the
modem you are using. This is an important setting that
determines the DTE baudrate or speed of communication
between the RF102S’s ports and your modem or ISDN TA.
Select your modem and baudrate as described on the
following pages.
Note: If you do not have a modem or ISDN TA attached to
the RouteFinder ports, use the default modem values.
11. To select your modem, in the Modem settings box, click
. The system loads modem information.
12. The Modem Initial Command dialog box displays.
Select your modem manufacturer and model and click OK.
Note: This setting configures the initial string of the
asynchronous port on the RF102S so that it will know how
to communicate with your modem. If you are using an
analog modem and your modem is not included in the
selection list, in most cases, Standard Modem will work.
If you are using an ISDN TA, refer to the ISDN TA’s User
Guide for information on the initialization and hang up
strings. Use RouteFinder Manager to enter your modem or
TA strings.