Multi-Tech Systems RF102S - Manual (Page 21)

Software Installation
21
13. The Setup Wizard: Modem Setting dialog box re-
displays. Select the baudrate from the Asynchronous
port settings list. Select the DTE speed (the speed of
communication between the asynchronous port of the
RF102S and the modem). For DCE speed compression
modems, this can normally be set to about four times the
speed of your modem. If you set the baudrate too high, the
dial-up connection may fail.
Note: You may need to set a lower baudrate since the
modem’s maximum connection speed may not be
attainable due to variations in phone line quality and ISP
connection.
Click Next to complete the basic configuration.
14. The Check List dialog box displays, summarizing your
configuration selections. Verify that all selections are
correct. If you find an incorrect setting, click Back to return
to the window containing the error and correct it. When
finished, click Next to return to the Check List dialog box.
Click Finish to complete the configuration.