Miele T 220 - Manual (Page 20)

Problem Possible cause Remedy
The drying process
goes on too long or
even switches off. Important : Before attempting to remedy one of the fol-
lowing causes, switch the dryer off and switch on
again to start the programme again.
Ventilation to the dryer is
insufficient (e.g because it
is installed in a room
which is too small). Open a door or window
while the machine is in op-
eration for increased air
flow.
The laundry was not suffi-
ciently spun. Make sure that your laun-
dry is thoroughly spun be-
fore drying.
The tumble dryer has
been overloaded. Do not exceed the maxi-
mum load for the
programme selected.
Metallic components, e.g.
zips have prevented the
dryer from registering the
correct moisture level in
the laundry. In future select a Timed
drying programme for
these garments.
The fluff filter may be
blocked. Clean the fluff filter.
The vent ducting or the
ventilation outlet is
blocked. – Check all parts of the
extraction system on a
regular basis (e.g. wall
vent, external grille,
bends in the ducting
etc.) and make sure
they are all free of any
hindrance.
– Remove any fluff.
Problem solving guide
20