Miele T 220 - Manual (Page 31)

Venting systems overview
The various venting systems which are
possible are described on the following
pages. These include:
a Flexible ducting hose
b Plastic piping or galvanised steel
piping
c Connecting directly to the wall vent
d Main venting duct
A ring adapter ** (1) is installed in
adapter (2) for the installation of a flexi-
ble vent duct. It reduces time and en-
ergy requirements during drying when
used in combination with a short
vent
duct (maximum 10 m total length) .
The ring adapter is removable and de-
signed for use with all venting systems.
** Note for test institutes: EN 61121 Standard
testing is carried out with the ring adapter.
Venting system with
Flexible ducting hose
This is a simple, cost effective
method of directing the moist air out-
side. The adapter supplied is fitted
into the vent opening on the dryer
and the ducting hose is then con-
nected to the adapter.
^ The following items are required: . .
. . . flexible ducting hose*
. . . a wall vent kit* or window vent
kit*.
* (Miele optional accessory)
A Ring adapter (1) must be taken out
of adapter (2), if the total duct length
is longer than 10 m.
If the total duct length is less than 10
m the ring adapter (1) should be left
in adapter (2).
B Fit adapter (2) into the vent opening
on the dryer, and connect vent hose
(3).
Installation - venting
31