Miele T 220 - Manual (Page 33)

Venting system with
plastic piping
Plastic piping is a good option where
the vented air has to be ducted for
some distance. The smooth walls of
the pipe are less resistant to the
vented air than the walls of a flexible
vent hose, for example. Time and en-
ergy consumption are better with
plastic piping.
^ The following items are required: . .
. . . an adapter* with rib on the inside.
. . . a wall vent kit* or window vent
kit*.
* (Miele optional accessory)
. . . Suitable piping available from
your dealer or builder’s merchant.
Where the pipe diameter is more than
100 mm, additional adapters are nec-
essary (e.g. to increase from
C 100
to 125 mm) to connect the pipe to the
dryer.
A The ring adapter (1) only needs to be
fitted into the Miele adapter (2), if the
total duct length is less than 10 m.
If the total duct length is greater than
10 m the ring adapter is not required.
B Fit Miele adapter (2) into the vent
opening on the dryer.
C Attach the pipe (3).
Example
1. Wall vent kit
(Separate fitting instructions are
supplied with the Miele wall vent kit).
2. Adapter
3. Plastic piping, diameter DN 100
Installation - venting
33