Multi-Tech Systems MVP400 - Manual (Page 34)

MultiVOIP Quick Start Guide
34
Building a Proprietary Phonebook Directory
To build your proprietary MultiVOIP 400/800 Phone
Directory (in an H.323 environment without the
GateKeeper option enabled), select the Proprietary
Phonebook option, then configure the “Master” MultiVOIP
400/800 and then add the “Slave” MultiVOIP 400/800s (or
other H.323 endpoints). Configuring the “Slave” MultiVOIP
400/800 is discussed later.
The first MultiVOIP 400/800 to be configured is designated
the “Master” and contains the proprietary phonebook
database. All subsequent MultiVOIP 400/800s added to
the proprietary phonebook database are designated
“Slaves”. The master database contains the phone
numbers of all H.323 endpoints available for
communication on an IP network. This database is
downloaded to each Slave MultiVOIP 400/800 as it comes
online.
To configure the “Master” MultiVOIP 400/800, verify that
the Proprietary Phonebook and Master options are
enabled. The Master IP Address, Send Status Report to
Master, and RAS Parameters group will be unavailable.