Multi-Tech Systems MVP400 - Manual (Page 42)

MultiVOIP Quick Start Guide
42
23. Click inside the Description box and enter a description
for the remote MultiVOIP 400/800 phone number. For
example, “Human Resources Desk”.
Note: Because the H.323 endpoint is not a MultiVOIP 400/
800, the Phone Directory database ignores the Voice
Channel entry. It does not matter what value is entered.
24. In the Station Identification group, select NO HUNT from
the Hunt Group list. Enter the Human Resource Desk’s
IP Address (for example, 202.198.100.04), and accept the
H.323 industry standard Port value (1720) used to
communicate with other H.323 endpoints.
Note: This stand-alone was not configured as part of a
Hunt Group. However, depending on your requirements,
you could configure a stand-alone to be part of a Hunt
Group.
25. Click OK and you are returned to the Phone Directory
Database dialog box which now includes the stand-alone
phone number and related information in the Phone
Number list.