Multi-Tech Systems MVP400 - Manual (Page 47)

47
Configuring the MultiVOIP
Select the Enable Diffserv check box to enable
differentiated services on routers that support this service.
This feature provides priority to voice packets so that they
are not delayed because of large data files being
downloaded.
The default Frame Type is TYPE_II. If this does not match
your IP network, change the Frame Type by clicking on the
drop-down arrow. The Frame Type choices are TYPE_II
and SNAP.
4. In the Port Address group, enter the IP Address for the
slave unit and the IP Mask. In the Gateway Address
group, enter the gateway IP address.
The IP Address is the unique IP address that you assign to
the MultiVOIP 400/800, and the Gateway Address is the IP
address of the device (such as a network router)
connected to the Internet/Intranet.
Click OK when you are finished. The Main menu displays.
5. From the Main menu, click Voice Channels to display the
Channel Setup dialog box. The Channel Setup dialog
box displays. The four tabs in this dialog box define the
channel interface, voice/fax parameters, Billing/Misc