Multi-Tech Systems MVP400 - Manual (Page 57)

57
Configuring the MultiVOIP
Note: After you have enabled the Slave option, the Slave
Status button is replaced by the Update button. Once
your Phone Directory database has been established, you
can click Update to refresh the entries in the Phone
Directory Database window.
19. Enter the IP address (204.022.122.118) of the Master
MultiVOIP 400/800 in the Master IP Address box and
select the Send Status Report to Master check box.
This established the New York office MultiVOIP 400/800
as the Master.
Note: In a Dial-On-Demand (DOD) network, you should
leave the Send Status Report to Master check box
cleared. This allows the router to disconnect whenever
there is no voice activity. Note that Slaves with the Send
Status Report to Master check box cleared will show up
as “Unknown” when viewing Slave status on the Master.
20. Click OK to return to the Main menu.
21. Click Download Setup to write the new configuration to
the slave unit. The Save Setup dialog box displays.