Multi-Tech Systems MVP400 - Manual (Page 40)

MultiVOIP Quick Start Guide
40
16. To add Channel 2 of the Slave MultiVOIP 400/800, click
Add. The Add/Edit Phone Entry dialog box displays
again.
17. Enter the phone number for the remote (Slave) MultiVOIP
400/800 in the Station Information group Phone
Number box. For example, 202.
18. Enter a description for the remote MultiVOIP 400/800
phone number for Channel 2 in the Description box. For
example, “London Office 2”.
19. In the Station Identification group, select HUNT GROUP
#2 from the Hunt Group list, enter the London Office 2’s
IP Address (202.056.039.100), and accept the H.323
industry standard Port value (1720) used to communicate
with other H.323 endpoints.
Note: Depending on your requirements, you may want
calls that cannot make a connection to London Office 1
(Hunt Group #2) to roll over to the New York office instead.
In this case, you would configure that phone entry to be
listed as a member of HUNT GROUP #1.