Multi-Tech Systems MT2834MR6 - Manual (Page 97)

97
Appendix
S34 1 char- 0–60 10 Sets the number of command characters allowed after +++AT.
acter
S36 1 sec 0, 1-255 5 Sets the time between DTR inactive and modem off-hook.
S36=0 disables DTR busy-out.
S37 1 sec 0-255 5 Sets the time between DTR active and modem on-hook.
S43 decimal 33, 31, 0 Sets fixed V.34 connect speed.
28, 26, 28 = 28800 bps; 26 = 26400 bps;. . .
24, 21, 48 = 4800 bps. 0 default disables this feature.
19, 16,
14, 12,
96, or 48
S48 decimal 33, 31, 0 Sets maximum V.34 connect speed.
28, 26, 33 = 33600 bps; 31 = 31200 bps;. . .
24, 21, 48 = 4800 bps. 0 default disables feature (same as S48=33).
19, 16,
14, 12,
96, or 48
S94 1 sec 0–254, 45 Sets the maximum time the modem remains out of service when
255 *H1 is active. S94=255 causes the modem to remain out of
service indefinitely, until it receives an enable from the
management software.