Maytag MAF 9801 - Manual (Page 14)

14
SELECT A PRE-SET PROGRAMME
The machine has four pre-set program-
mes. Press the button for the desired
programme. The programmes are shown in the
table below.
You can then easily adjust the Temperature
and the Spin speed; see the next step.
You can also make permanent alterations (to
programmes, settings and options, etc.) in the
pre-set programmes so that they meet your par-
ticular needs; see Chapter 11, Making your own
washing programmes.
If you only wish to spin or rinse without
changing the settings permanently, see below in
this Chapter.
TEMPORARY ALTERATION OF TEMPERA-
TURE AND SPIN SPEED
Temperature
Alter the temperature by indexing forward with
the
button.
The selected temperature is indicated on the
bottom edge of the display together with the
symbol as you index forward.
You can select temperatures between 30°C
and 95°C or C. By selecting C, the wash tempe-
rature will be the same as that of the incoming
water.
It is not possible to select a temperature hig-
her than 40°C for the Hand programme.
If you wish to save the change permanently
(max. 60°C), you can press the
Enter
button af-
ter making the change.
Spin speed/No spin
Change the spin speed by indexing forward with
the
button.
The selected speed is indicated in the top
right corner of the display together with the
symbol as you index forward.
You can choose between different speeds (400
- 1800 revolutions/minute), No Spin or No Spin
or No Drain.
55
66
WM5566-P14-3
P1
P2
P3
P4
(A) Can be changed before start;
see instructions.
(B) Gentle programme – high
water level.
Programme information Programme content
1/3 (2,0kg)
1/2 (3,0 kg)
Rinse Long spin
Programme type Max quantity Temperature °C (A) Spin speed r/min (A) Main wash Spin Rinse Spin Rinse Spin Rinse Spin
1/1 (6,0 kg) Wash Short spin
(max 800 r/min)
Pre-wash
60°C 1800 Normal
40°C 1200 White/Coloured
40°C 800 Quick
30°C 800 Hand (B)