Maytag MAF 9801 - Manual (Page 15)

15
If you wish to save the change permanently,
you can press the
Enter
button after making the
change.
Spinning at 400-800 revolutions/minute al-
ways means a short spin.
It is not possible to select a spin speed higher
than 800 revolutions/minute for the Hand pro-
gramme.
No Spin means that the programme will be
executed without spinning and will end with
draining.
No Drain means that the programme will be
executed without spinning and will end with
the final rinsing water remaining in the machi-
ne. The wash will then remain floating in the
final rinsing water. You can then select a spin
programme or press the
button to empty
the machine, if required.
C L O S E T H E D O O R A N D S TA RT T H E
PROGRAMME WITH THE BUTTON
The text on the bottom edge of the
display indicates that the programme has star-
ted.
NOTE
If the child lock is on, the button must be held
down for 3 seconds.
Remaining time
The remaining time is shown in hours and minu-
tes (alternating) at the bottom right of the dis-
play together with the symbol.
Once a programme has been selected, an es-
timated running time for the programme is dis-
played. This time may vary to some extent from
time to time due to the temperature of the in-
coming water and the size of the load.
The remaining time is recalculated during
the programme and may then be increased or
reduced to some extent.
DURING THE PROGRAMME
The actual sequence is shown in the display
during the programme, e.g. “Main wash” or
“Rinse”.
If you wish to interrupt or change the pro-
gramme
Hold down the button for three se-
conds. The text on the bottom edge of the
display indicates that the programme has been
interrupted.
Add more detergent, if necessary, before se-
lecting a new programme.
Putting in or taking out washing
If you wish to put in or take out washing after
you have started the machine, you must hold
down the
button for three seconds, and a
key will appear on the bottom edge of the dis-
play. Any water will be pumped out, and the
door can then be opened. Put in more washing,
add more detergent, if necessary, and close the
door. The washing programme will restart au-
tomatically from the point at which it was in-
terrupted.
Change settings after starting
It is possible for you to alter certain settings
and options after you have started the washing
programme.
77