Maytag MAF 9801 - Manual (Page 17)

17
DELAYED START (1-24 HOURS)
If Delayed start is set to 5 hours, for example,
this means that the machine will start the pro-
gramme 5 hours after you press the
but-
ton.
If you wish to delay the start of any pro-
gramme temporarily, you should proceed as
follows before pressing the
button:
1. Select the programme, but do not press the
button.
2. Index forward with the
Menu
button until
Delayed start appears in the display.
3. Index forward to the desired number of hours
with
.
4. Press the
Enter
button once. The selected
programme appears in the display.
5. Close the door and press
to start the
programme.
Delayed start is disconnected automatically
at the end of the programme.
TEMPORARY SPINNING OR RINSING
If you wish to run a temporary spin or rinse pro-
gramme without altering
P1
-
P4
, you can do
the following:
1. Put in the washing and close the door.
2. Press the
P1
button once.
3. Press the
Menu
button once.
4. Index forward with until Spin or Rin-
se appears in the display.
5. Press the
Enter
button once. The selected pro-
gramme appears in the display.
6. Adjust the spin speed by indexing forward with
if required.
7. Press to start the programme.
If you wish to have Spin or Rinse as one of the
four pre-set programmes, see Chapter 11, Ma-
king your own washing programmes.
IMPORTANT
If you store a programme by mistake, you can
reset it to its settings at the time of delivery; see
Reset programme in Chapter 11, Making your
own washing programmes.