Maytag MAF 9801 - Manual (Page 21)

21
CREATE YOUR OWN WASHING PROGRAMME
1. Press one of the buttons P1
-
P4
under
which you wish to store your programme. You
can select any button you like if you only want
to make a temporary programme.
2. Index forward with the
Menu
button to the
setting or option that you wish to change. If the
child lock is activated, nothing will happen. Hold
down the button for 3 seconds, and then press
as usual.
All the programme types, settings and options
are described in the table alongside.
3. If you wish to change a setting, you should
index forward or back with the
but-
tons until the desired setting appears in the dis-
play.
4. Then index further with the
Menu
button to
the next setting/option, and change it in the
same way if required.
5. Repeat this until the finished programme
appears in the display together with the spin
speed and any preferred temperature and other
options. The text Stop will be displayed on the
bottom line.
You can now use the programme without sto-
ring it (temporary programme). Close the door
and press the
button to start the pro-
gramme.
Store the programme permanently
If you wish to store the programme for use
whenever you intend to use the washing mach-
ine, press the
Enter
button before starting. The
button selected by you originally (P1-P4) will
appear at the bottom left of the display.
You can now select the programme by pres-
sing the button chosen by you in Step 1.
NOTE
The Delayed start option and temperatures over
60°C are not stored permanently.
IMPORTANT
If you store a programme by mistake, you can
reset it to its settings at the time of delivery; see
Reset programme later in this Chapter.
TIP
If you do not wish to index through all the
settings/options, you can terminate the input
by pressing the
Enter
button ONCE.
To store the programme, you must then press
the Enter button once more.
INTERRUPT INPUT
If you change your mind and wish to interrupt
the input sequence, you should switch off the
machine with the main power switch
.
When you switch it on again, you can start
from the beginning or select one of the pre-set
programmes as usual.
x
Select
Program
Quick
< Next >
x
Select
Program
Wool
< Next >
x
Wool rpm
800
Stop 30°