Metrologic Instruments Solaris MS7820 - Manual (Page 38)

34
S
CANNER
O
PERATION
I
NDICATOR
D
ESCRIPTIONS
Failure Modes
Figure 32. LED
Flashing BLUE LED and One Razzberry Tone
This indicates the scanner has experienced a laser subsystem
failure. Return the unit for repair at an authorized service
center.
Flashing Blue LED and Two Razzberry Tones
This indicates the scanner has experienced a motor failure.
Return the unit for repair at an authorized service center.
Continuous Razzberry Tone with LED off
If, upon power up, the scanner emits a continuous razzberry
tone, then the scanner has an electronic failure. Return the unit
for repair at an authorized service center.
Three Beeps - on power up
The scanner beeps three times on power up indicates the
nonvolatile memory, that holds the scanner configuration, has
failed. Return the unit for repair at an authorized service
center.