Metrologic Instruments Solaris MS7820 - Manual (Page 48)

44
C
ONFIGURATION
M
ODES
The MS7820 has three modes of configuration.
• Bar Codes
The MS7580 can be configured by scanning the bar codes included in the
Metrologic Configuration Guide shipped with the area imager.
This manual can also be downloaded FREE from Metrologic’s website
(www.metrologic.com).
• MetroSet2
This user-friendly Windows-based configuration program allows you to
simply ‘point-and-click’ at the desired scanner options. This program can be
downloaded FREE from Metrologic’ website (www.metrologic.com) or set-up
disks can be ordered by calling 1-800-ID-METRO.
• Serial Programming
This mode of configuration is ideal for OEM applications. This mode gives
the end-user the ability to send a series of commands using the serial port of
the host system. The commands are equivalent to the numerical values of
the bar codes located in the MetroSelect Configuration Guide
(
MLPN
00-02407).