Installation, Connection – MITSUBISHI ELECTRIC EN-1 User Manual
Page 3
EN-3
1
Copy three fi les (Installer_Mitsubishi.msi, Setup.Exe, and Setup.Ini) contained in the Tools folder of CD-
ROM to the hard disk of your personal computer.
2
Double-click the fi le named Setup.Exe.
3
When the following window appears, click Next.
Installation
Before starting installation, be sure to read “ReadMe.txt” contained in the CD-ROM.
Connection
•
Use a straight-through category-5 cable for LAN connection.
•
Don’t touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged
from your body, causing damage to the projector.
Computer
To LAN terminal
LAN cable (option)
(100BASE-TX or 10BASE-T should be supported.)
LAN cable (option)
(100BASE-TX or 10BASE-T should be
supported.)
External HUB
Preparation/SetUp (continued)