MITSUBISHI ELECTRIC EN-1 - Manual (Page 7)

EN-7
5 Select [Assign a specifi c IP address] and click Next.
6 Enter a fi xed IP address (for example, 192.168.0.1)
and click Next.
7 Click Assign.
8 Click Finish.
9 Click the Search button.
• Check the IP address you set.
(Note 2)
When using the error/alert e-mail notifi cation function
described later, click the Assign IP button and set the
subnet mask and default gateway correctly.
• For the values of the subnet mask and default
gateway, contact your network administrator.
When not using a DHCP server
Preparation/SetUp (continued)