Setting the ip address of the projector – MITSUBISHI ELECTRIC EN-1 User Manual
Page 5
EN-5
1
Start the Projector-Control Device Installer.
• Select [Start] - [All Programs] - [Mitsubishi] -
[Mitsubishi Projector - Control Device Installer] (in
the case of Windows
®
XP).
2
Click the Search button.
•
Mitsubishi projector is recognized.
(Note 1)
When Mitsubishi projector isn’t recognized, check
the following.
•
The fi rewall function has been disabled. (When it
has been enabled, search may not be conducted.)
•
The personal computer and the projector are on
the same network. (For preventing unauthorized
access.)
•
More than one Projector-Control Device Installer
isn’t running.
3
Select a projector and click the Assign IP button.
4
The Assign IP Address screen appears.
Setting the IP address of the projector
Before setting the IP address, check that the projector has been LAN-networked and turn on the main power of the
projector.
•
For automatic IP address setting by the DHCP server, go to page 6. For IP address setting without using the
DHCP server, go to page 7.
Preparation/SetUp (continued)