Dvd setup menu 6 – Marantz DV4001 User Manual

Page 40

Advertising
background image

DVD Setup Menu

6

40

HDMI VIDEO

• Default setting: AUTO

Selects a suitable video resolution depending on the capability of the connected TV/device to
enhance the HDMI video output.

480P/525P – Progressive output in 480 lines for NTSC TV

576P/625P – Progressive output in 576 lines for PAL TV

720P – (if a HDMI TV is connected) Progressive output upscaled to 720 lines

1080i – (if a HDMI TV is connected) Interlaced output upscaled to 1080 lines

AUTO – The video output will automatically follow the display’s supported resolution

Note

• If no display appears on the TV due to an unsupported resolution, use the composite video cable to connect the

DVD system and your TV. Turn on your TV to the correct input channel for the composite video and adjust the
resolution setting to 480P/576P.

• The resolution can also be set with the HDMI button on the front panel.

• In general, the larger the number, the higher the resolution.

• When the resolution is changed, the image may be corrupted or the output may take longer than normal.

• Pressing the HDMI button for three seconds or more toggle the HDMI on/off state.

Setup Examples

Resolution

(HDMI Setting)

Playback Disc

Disc Recorded in Squeeze Ratio

Disc Recorded in 4:3 Ratio

TV ASPECT

Monitor Setting

TV ASPECT

Monitor Setting

480P/525P

576P/625P

16:9 WIDE

Full/Squeeze

SUPERWIDE

16:9 SQUEEZE

OFF

*1

Standard

Normal

4:3

Through

720P

1080i

Normal/Through

AUTO

The resolution is automatically selected to match the monitor you are using. Set TV SYSTEM, WIDE
SCREEN FORMAT
and your monitor setting to match the selected resolution.

Some monitors may use setting names that are different than those shown here.

*1

If the aspect ratio you desire is not available, select the most suitable setting from SUPERWIDE, 16:9 SQUEEZE and

OFF in “WIDE SCREEN FORMAT”.

VIDEO OUT

HDMI Video Output

YCbCr Output

Composite/S-Video output

480P

480P (NTSC progressive)

Follow the Disc Source with Interlace output.
(ex: NTSC disc is played: NTSC interlace out.)

576P

576P (PAL progressive)

720P

1080i

Follow the Disc Source with Progressive output.
(ex: NTSC disc is played: NTSC Progressive
out.)

Advertising
This manual is related to the following products: