Marantz DV4001 - Manual (Page 41)

6 DVD Setup Menu
41
English
DVI OUTPUT RANGE
• Default setting: STANDARD
When connecting the DVI unit, black may
rise to the surface depending on the display.
• ENHANCED – Image data values between
0 (black) and 255 (white)
• STANDARD – Image data values between
16 (black) and 235 (white)
COMPONENT
(Euro model only)
• Default setting: RGB
This setting allows you to toggle the output
of the video signal between RGB (on the A/V
EURO CONNECTOR) and YCbCr (on the
component).
• YCbCr – Select this for YCbCr Pr
connection on component Video out.
• RGB – Select this for the A/V EURO
CONNECTOR.
To change the COMPONENT out manually:
1) Press OPEN CLOSE
0 to open the disc tray.
2) Press
3 (RIGHT) on the remote control.
3) Press ANGLE on the remote control to change
the COMPONENT out.
Note
• When the player is set to YCbCr, some TV may
not properly synchronise with the player on the
A/V EURO connector.
BLACK LEVEL
• Default setting: 7.5 IRE (USA model)
0 IRE (European model)
If you set the TV type to NTSC, set the Black
level shift to 7.5 IRE. This will improve the
color contrast during playback. The black
level setting has no effect if the TV type is
set to PAL.
• 7.5 IRE – Select this to enhance the black
level.
• 0 IRE – Select this for the standard black
level setting.
CLOSED CAPTION (USA Model only)
• Default setting: OFF
Closed captions are data hidden in the video
signals of specifi c discs, and are invisible
without the use of a special decoder. The
difference between subtitles and captions
is that subtitles are intended for hearing
persons and captions are for the hearing
impaired. Subtitles rarely show all of
the audio. For example, captions show
sound effects (e.g., “phone ringing” and
“footsteps”), while subtitles do not. Before
you select this function, please ensure that
the disc contains closed caption information
and your TV set also supports this function.
• ON – Select this to enable the closed
caption function.
• OFF – Select this to disable the closed
caption function.