Motorola CAJUN P120 - Manual (Page 109)

Chapter 7 Cajun Campus CLI (Command Line Interface)
Cajun P120 User’s Guide 95
Set Vlan Command
Use the set vlan command to set the Port-VLANs. If adding a new VLAN, the
VLAN number must be within the range 1 to 3071.
The syntax for this command is: set vlan vlan_num slot_num/port_num
Example:
To set VLAN 850 to include port 3 on module 1.
Console>(enable) set vlan 850 1/3
Console>(enable)
vlan_num Number identifying the VLAN
slot_num Module number (always 1)
port_list Port number on the module belonging to the VLAN